JR-Wheels Wheel Spacers JRWS1 Black Aluminum

There are 6 types of JR-Wheels Spacers, please check carefully before ordering!

JRWA1: These spacers are meant for cars that use bolts to mount the wheels. These spacers do not only change the offset of your wheels, they also change your wheel mounting style from bolts to wheel nuts.

JRWA2: These spacers are meant for cars that use bolts to mount the wheels. These spacers only change the offset of your wheels as you will still have to use bolts to mount your wheels to the spacers.

JRWA3: These spacers are meant for cars that use wheel nuts to mount the wheels. These spacers only change the offset of your wheels as you will still have to use wheel nuts to mount your wheels to the spacers.

JRWA4: These spacers do not only change the offset of your wheels, they also convert the bolt pattern of the car.

JRWS1: These are traditional spacers that only change the offset of your wheels.

JRWS2: These are traditional spacers that only change the offset of your wheels, but unlike the JRWS1’s these also have a centre lip to assure wheel balance. NOTE: These do NOT come with Bolts.

Please note:
All spacers are sold as a set of two spacers so if you like to do your complete car please order two sets.

The thickness of the spacer is in mm per spacer so if you buy a spacers set of 15mm the complete axle will be 30 mm wider.

Different size wheel bolts are used for different size spacers.
There are also different types of bolts like; Hex bolts, Tuner bolt, Star bolts designed to fit aftermarket tuning wheels.
Below you will find what the most common uses are:

Standard (28mm)
Long (32mm t/m 55mm)

26mm - 28mm standard lenght, are used for mounting wheels without spacers
32mm/33mm = for 3mm en 5mm spacer
39mm/40mm = for 10mm/12mm spacer
45mm = For 15mm spacer
50mm = For 20mm spacer
55mm = For 25mm/30mm spacer

CAUTION: Make sure you have atleast 6 full rotations on your bolt when mounting a wheel with spacer